RED ROCKET-X INSTALLATION INSTRUCTIONS
CHAPTER 5:
INSTALL IN A WINDOWS-BASED
COMPUTER
REQUIRED TOOL
®
Phillips
#1 screwdriver
POWER SUPPLY
Before installing the RED ROCKET-X
to plug into the RED ROCKET-X 6-pin power connector. The 6-pin PCIe power cable that is included with the RED
ROCKET-X is for Mac Pro
ATTACH THE PC EXTENDER TO THE RED ROCKET-X
If your Windows-based computer has a PCIe card holder, attach the PC extender (included) to the RED ROCKET-X.
When you install the RED ROCKET-X in the Windows-based computer, the PC extender slides into the PCIe card
holder, securing the RED ROCKET-X.
1. Use a Phillips #1 screwdriver to install the two (2) M3 x 0.7 x 6 mm pan head screws (included) that attach the PC
extender (included) to the end of the RED ROCKET-X.
The PC extender should be flush with the front of the RED ROCKET-X.
The wider end of the PC extender should be at the top of the RED ROCKET-X.
Figure: Attach PC Extender
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
®
, ensure that you have the appropriate power connector or power cable adaptor
®
installations only, and is not compatible with a Windows
®
-based computer.
9 5 5 - 0 0 3 3 , R EV - T
|
2 0