Red Digital Cinema RED ROCKET-X Installation Instructions Manual page 22

RED ROCKET-X INSTALLATION INSTRUCTIONS
7. Remove one (1) free slot bracket from the system. Depending on your Windows-based computer, you may need to
use a Phillips #1 screwdriver to remove the slot bracket.
Figure: Remove Slot Bracket
8. Line up the RED ROCKET-X connectors with a PCIe x16 physical slot that provides at least 16 lanes (x16), and
then gently but firmly press the card into the slot. If you installed the PC extender, ensure that the PC extender
slides into the PCIe card holder.
NOTE: To prevent damage to your system and the RED ROCKET-X, DO NOT rock the card or use excessive force
when installing the RED ROCKET-X.
Figure: Insert RED ROCKET-X
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 0 3 3 , R EV - T | 2 2