Table of Contents
Advertisement
RED ROCKET-X INSTALLATION INSTRUCTIONS
4. Touch the metal on the outside of the computer to discharge any static electricity from your body.
NOTE: To avoid generating static electricity while installing the RED ROCKET-X, DO NOT walk around the room
until you have completed the installation and closed the chassis.
5. Open the chassis casing so that you can access the PCIe slots.
Figure: Open Casing
6. If the chassis has any screws installed that are intended to secure the card to the chassis, remove those screws.
7. Line up the RED ROCKET-X connectors with the slot that has the highest number of electrical PCIe lanes, and then
gently but firmly press the card into the slot. For more information about choosing a slot, go to
Slot" on the previous
NOTE: To prevent damage to your system and the RED ROCKET-X, DO NOT rock the card or use excessive force
when installing the RED ROCKET-X.
Figure: Insert RED ROCKET-X
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
page.
"Select a PCIe
9 5 5 - 0 0 3 3 , R EV - T | 1 7
Advertisement
Table of Contents
