RED ROCKET-X INSTALLATION INSTRUCTIONS
19. If you are using the HD-SDI slot filler, follow the instructions below to install and connect the HD-SDI slot filler:
For more information, go to
A. Remove one (1) free slot bracket from the system.
B. Slide the HD-SDI slot filler into the empty slot so that the SDI Out B connector is toward the back.
Figure: Install HD-SDI Slot Filler
CAUTION: Ensure that the HD-SDI slot filler or connectors DO NOT contact other components inside the
computer.
C. Connect the SDI Out A cable on the HD-SDI slot filler to the SDI Out A connector on the RED ROCKET-X. The
SDI Out A connector is the right connector when the RED ROCKET-X is installed.
D. Connect the SDI Out B cable on the HD-SDI slot filler to the SDI Out B connector on the RED ROCKET-X. The
SDI Out B connector is the left connector when the RED ROCKET-X is installed.
Figure: Connect HD-SDI Slot Filler to RED ROCKET-X
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
"Supported HD-SDI Signals" on
page 43.
9 5 5 - 0 0 3 3 , R EV - T | 1 4