Table of Contents
Advertisement
RED ROCKET-X INSTALLATION INSTRUCTIONS
16. Line up the RED ROCKET-X connectors with slot 2, and then gently but firmly press the card into the slot, ensuring
that the lip at the end slides between slot 2 and slot 3.
Figure: Insert RED ROCKET-X
NOTE: To prevent damage to your system and the RED ROCKET-X, DO NOT rock the card or use excessive force
when installing the RED ROCKET-X.
17. Plug your 6-pin PCIe power cable (either a PCIe 6-pin to 6-pin power cable or the included PCIe 6-pin to 6-pin
Dual Y Power Splitter) into the RED ROCKET-X. Make sure that the latch of the power cable aligns with the
corresponding slot on the RED ROCKET-X.
WARNING: If you use the PCIe 6-pin to 6-pin Dual Y Power Splitter (included) to connect only the RED ROCKET-X
or graphics card, ensure that the unused connector does not come in contact with a fan or any moving parts.
Figure: Connect Power to RED ROCKET-X
18. If you are using the PCIe 6-pin to 6-pin Dual Y Power Splitter (included) to connect both the graphics card and the
RED ROCKET-X to a single power connector in the Mac Pro, plug the second connector on the PCIe 6-pin to 6-
pin Dual Y Power Splitter (included) into the graphics card. For more information on different ways to connect
power, go to
"Power Supply" on
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
page 10.
9 5 5 - 0 0 3 3 , R EV - T | 1 3
Advertisement
Table of Contents
