System Connection; S-Bus Data Link - Sony IXS-6700-C Installation Manual

1-9. System Connection

1-9-1. S-BUS Data Link

The routing switcher system is connected with the S-BUS data link using a 75 Z coaxial cable.
The main equipment of the S-BUS data link is shown in the table below.
Type in S-BUS Model (function name)
data link
*
Primary station (P) Routing switcher controller
HKSP-R80
Routing switcher
IXS-6700/IXS-6600
(integrated routing switcher)
HDS-X5800
(routing switcher processor)
Secondary station (S) * Remote control unit
BKS-R3220
(X-Y control unit)
BKS-R3219
(32 button control unit)
BKS-R1617
(universal control unit)
BKS-R1618
(16 button control unit)
BKS-R3216
(8 destination control unit)
Terminal Personal computer
(terminal emulator)
* : (P) and (S) indicate the setting of the S/P selector switch on the CPU board (on the CA board for the IXS series) in the routing
switcher.
n
Switchers other than the IXS-6700/IXS-6600 can be also set as a primary station. In this case, some
functions are limited.
IXS-6600/6700
Quantity Function/role
1 Controls the entire S-BUS data
link.
Can also function as a secondary
station.
253 (max.) Controls the individual secondary
station.
Operates in accordance with
the commands from the primary
station.
1 Establishes the various setups of
the system.
The errors that have occurred in
the S-BUS line are displayed and
managed by the emulator.
1-23