Service Information; Error Display; Front Panel Status - Sony IXS-6700-C Installation Manual

2-1. Error Display

2-1-1. Front Panel Status

The current status of the unit can be displayed in the
display window through use of the operation buttons on the
Displayed Items
The items displayed in the display window are in a tree
configuration, as shown below. You can change the
displayed item with the operation buttons.
Top menu
INTEGRATED ROUTING
SYSTEM
4 $
ERROR STATUS
[MENU]
4 $
DISP UNIT STATUS
[MENU]
4 $
[MENU]
[ENTER]
SET/RESET STATUS
[MENU]
IXS-6600/6700

Service Information

Top display
Error display: Shows errors that occurred in the unit.
[ENTER]
xxxxxxxx ERR
[CANCEL]
xxxxxxxx ERR
[MENU]
Status display: Status of the machine and settings
[ENTER]
CPU RUN
[CANCEL]
+
CPU SW SETTING
IP ADDRESS
[MENU]
SBUS STATION ID
PSU ELAPSED TIME
FAN ELAPSED TIME
Setting menu (for making settings for the unit)
[ENTER]
PSU ELAPSED TIME
[CANCEL]
FAN ELAPSED TIME
[MENU]
Section 2
front panel. It is also possible to reset the elapsed time of
the power units and fan units.
The backlight of the display window will go off about five
minutes after the last operation. Pressing any button makes
the backlight go back on.
Errors are displayed in order of importance.
4 $
For details on errors, see "Error Status" on page
62.
4 $
Shows which CPU (main or backup) is active.
4 $
Shows the settings of the DIP switches on
the CA board.
4 $
Shows the IP address of the network connection
for the CPU.
4 $
Shows the station ID of the S-BUS.
4 $
Shows the elapsed time of the power unit.
4 $
Shows the elapsed time of the fan unit.
4 $
Resets the elapsed time of the power unit.
4 $
Resets the elapsed time of the fan unit.
4 $
2-1