Storage; Maintenance - Fieldmann FZN 2000-E Manual

The safety blade has rounded and stepped teeth on the sides which reduce the risk of injury
when working with the tool. Additional protection against impact prevents undesirable back
blow in case of accidental contact of the blade with wall, fence, etc.
If the blades get jammed or blocked by a foreign object, turn off the motor immediately,
unplug the tool from the mains and remove the object from the blades.
Caution: If the blades get into contact with metal objects, e.g. fence, the blades may be
damaged.
When cutting, make sure to keep the power cord safely behind you. Always start trimming
the hedge at a point nearest to the power socket and continue trimming further on. You
should therefore plan the cutting direction before starting hedge trimming.

11. STORAGE

Electric hedge trimmer must be stored out of reach of children.
Remove the mains plug.
Clean the electric hedge trimmer and attach the scabbard 1 onto the cutting blade 2.
Store the electric hedge trimmer in a dry place without the frost risk.

12. MAINTENANCE

Cleaning the hedge trimmer
ATTENTION! Danger of injury / bodily harm by electric shock! Before any maintenance,
always disconnect the tool from the power network and attach the scabbard 1 onto the
cutting blade 2.
Wipe the electric hedge trimmer using wet cloth.
Apply low-viscosity oil onto the cutting blade 2.
Avoid contact with plastic parts.
ELECTRIC HEDGE TRIMMER
(Fig. 1)
(Fig. 1)
Hedge trimming | Storage | Maintenance 13 EN
USER'S MANUAL