Page 2
English ....................................3–18 Čeština ..................................... 19–32 Slovenčina ..................................33–46 Magyarul ..................................47–60 Polski ....................................61–74 FZN 70205-0...
Table of Contents Cordless hedge trimmer USER'S MANUAL Thank you for purchasing this cordless hedge trimmer. Before you start using them, please, carefully read this user’s manual and save it for possible future use. TABLE OF CONTENTS 1. IMPORTANT SAFETY INSTRUCTIONS ........................6 2.
The operation manual includes also instructions for operation, maintenance and repairs. The manufacturer does not take any responsibility for accidents or damages resulting from the failure to adhere to this manual. FZN 70205-0...
Symbols 2. SYMBOLS Risk of injury when instructions are not followed. Protect the tool from the damp and never expose it to rain! Read the Instruction Manual attentively prior to use. Use eyes protective equipment. Use ears protectiove equipment. Guaranteed sound power level Lwa 90dB (A).
Remove all contents from the box and inspect to ensure no damage was incurred during shipping, and that the items listed below are included: Cordless hedge trimmer Blade safeguard Instruction Manual Warranty card Should the components be missing or damaged, contact the dealer of the machine. FZN 70205-0...
Cordless hedge trimmer application | Safety instructions 4. CORDLESS HEDGE TRIMMER APPLICATION APPROPRIATE APPLICATION The cordless hedge trimmer is intended for cutting hedges, shrubs and low-lying plants in private domestic gardens and allotments. Appropriate application of the cordless hedge trimmer is conditioned by keeping of the instructions mentioned in the Instruction Manual.
Page 10
Loose clothes, jewellery or long hair can be caught in moving parts,. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards. FZN 70205-0...
Page 11
Safety instructions POWER TOOL USE AND MAINTENANCE Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off.
The remaining capacity of the battery is displayed by the 4LED control lights (10). Battery capacity Indicator as below: All 4 LEDs are lit: The battery is fully charged. 3 or 2 or 1 LED(s) are lit: The battery has an adequate remaining charge. 1 LED blinks: The battery Is empty, recharge the battery. FZN 70205-0...
Page 13
Operation All LEDs blink: The battery pack is too hot or too cold. 7.2 CHECK BEFORE USE! DANGER! Attention, danger of injury! Do not operate the appliance unless you did not fi nd any faults. If a part has become defective, make sure to replace it before you use the appliance again.
Technical data | Cleaning and maintenance 8. TECHNICAL DATA Item number FZN 70205-0 Rated voltage 20 V Stroke rate 1300 RPM Cutting diameter 16 mm Operational time 25 min (2Ah), 50 min (4Ah) Electronic brake Bar lenght 510 mm ACCESSORIES...
Storing and transport | Trouble shooting 10. STORING AND TRANSPORT STORING DANGER! Danger of injury! Make sure no unauthorised persons can gain access to the appliance! Slip the protection cover over the cutting equipment. Store the appliance where it Is dry and well ventilated. TRANSPORT Slip the protection cover over the cutting equipment.
This product fulfi ls all basic requirements of the EU directives that apply to it. Text, design and technical specifi cations can change without prior notice and we reserve the right for their change. User manual in the original language. FZN 70205-0...
Need help?
Do you have a question about the FZN 70205-0 and is the answer not in the manual?
Questions and answers