Nexcom NViS 6308 Series User Manual page 72

Chapter 4: BIOS Setup
Graphics Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
Graphics Configuration
Primary Display [Auto]
Primary IGFX Boot Display [VBIOS Default]
DVMT Total Gfx Mem [MAX]
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Primary Display
Select which IGFX/PEG/PCI graphics device should be the primary display or
select SG for Switchable Gfx.
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary display.
DVMT Total Gfx Mem
Select DVMT 5.0 Total Graphic Memory size used by the Internal Graphics
Device.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
PCH-IO Configuration
Select which of IGFX/PEG/PCI
Graphics device should be
Primary Display Or select SG
for Switchable Gfx.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
HD Audio
Control detection of the HD Audio device.
Disabled
Enabled
Auto
PCH LAN Controller
Enables or disables onboard NIC.
PCIEX1_1 and PCIEX4_1 Gen Speed
Configures the link speed of the PCIe x1 slot and PCIe x4 slot.
58
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
PCH-IO Configuration
HD Audio [Auto]
PCH LAN Controller [Enabled]
PCIEX1_1 Gen Speed [Auto]
PCIEX4_1 Gen Speed [Auto]
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
HD Audio will be unconditionally disabled.
HD Audio will be unconditionally enabled.
HD Audio will be enabled if present, disabled otherwise.
Control Detection of the
HD-Audio device.
Disabled = HDA will be
unconditionally disabled
Enabled = HDA will be
unconditionally enabled
Auto = HDA will be enabled if
present, disabled otherwise.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NViS 6308 Series User Manual