Volkswagen 6R0 017 221 Installation Instructions Manual page 16

– Install variable load compartment flooring, if fitted.
– Install luggage compartment cover.
Note
Check free movement of luggage compartment cover, adapt in
area of partition grille support struts as necessary.
Proceed as follows if the luggage compartment cover sticks in
area of partition grille support struts:
– Saw off the area, as marked, on the front part of the luggage
compartment cover.
– Smooth off/straighten the cut section using a sharp knife.
– Seal the edges of the cut using a paint stick.
WARNING!
Observe paint manufactures drying period before reinstalling
luggage compartment cover.
Note
♦ After a short drive, check all screw fastenings and retighten as
necessary.
♦ After an adequate period, check all screw fastenings again.
WARNING!
♦ The transportation of people behind the partition grille is
forbidden!
♦ The head restraints must always be set correctly according
to the head height of the seat occupant.
♦ Always secure heavy loads with a securing strap.
6
3. Installing partition grille 6R0 017 221
Volkswagen Accessories