5 Electrical installation
NOTE
Electrical installation and service must be car-
ried out under the supervision of a qualified
electrician. Electrical installation and wiring
must be carried out in accordance with the
stipulations in force.
Sensors
VPD can be supplemented with up to two hot water
sensors, one for display and one for control. The display
sensor is positioned in the submerged tube for the
display sensor (UA1) and the control sensor in the
submerged tube for control sensor (UA2). In cases
where it is only possible to connect one sensor, use the
submerged tube for control sensor (UA2).
Use the sensors provided with the heat pump (or other
heat source). When no heat sensors have been
provided these must be ordered from the manufacturer
of the heat source.
VPD 150, 300
Chapter 5 |
Electrical installation
11