Related Manuals for Nibe VPD 150
Summary of Contents for Nibe VPD 150
- Page 1 User and Installer VP D manual VPD 150, 300 Water heater Accumulator tank VP D CHB GB 1721-1 431365...
-
Page 3: Table Of Contents
Table of Contents 1 Important information 2 For the User 3 For the Installer 4 Technical data Contact information VPD 150, 300 Table of Contents |... -
Page 4: Important Information
This symbol indicates danger to person or ma- chine . Caution This symbol indicates important information about what you should observe when maintain- ing your installation. This symbol indicates tips on how to facilitate using the product. Chapter 1 | Important information VPD 150, 300... - Page 5 Description Notes Signature Date ✔ Hot water (page 9) Shut off valves Cold water (page 9) Shut off valves Non-return valve Mixing valve Safety valve Electricity (page 11) Sensors VPD 150, 300 Chapter 1 | Important information...
-
Page 6: For The User
Service For service, contact the installer. Serial number (PF3) (14 digits) and installation date should always be stated. Only replacement parts supplied by NIBE may be used. Chapter 2 | For the User VPD 150, 300... -
Page 7: For The Installer
The area where VPD is located must be equipped with floor drainage. 20-55 mm 30 - 50 mm 0 - 50 mm VPD 150, 300 Chapter 3 | For the Installer... - Page 8 Connection, supply line from HP, white (22 mm) Designations in component locations according to standard IEC 81346-1 and 81346-2. HVAC components Submerged tube for hot water sensor (display) Submerged tube for hot water sensor (control) Chapter 3 | For the Installer VPD 150, 300...
- Page 9 Connect the supply line from the heat pump to pos ■ Return line hp (XL36) (white) on the water heater section. Hot water connection to pos (XL4) (red) on the water ■ heater. Cold water Schematic diagram VPD 150, 300 Chapter 3 | For the Installer...
- Page 10 Further option information is available at www.nibe.eu ceed 60 °C. and in the respective assembly instructions for the heat sources used. To exhaust air heat pump VPD can be docked with heat pump, for example NIBE exhaust air heat pump. Schematic diagram Symbol key Symbol...
- Page 11 (UA2). Use the sensors provided with the heat pump (or other heat source). When no heat sensors have been provided these must be ordered from the manufacturer of the heat source. VPD 150, 300 Chapter 3 | For the Installer...
-
Page 12: Technical Data
4 Technical data Dimensions Ø 596 Chapter 4 | Technical data VPD 150, 300... - Page 13 Connection, hot water (red) Connection, cold water/ HP return (blue) Connection, HP front (white) Part No. 080119 080118 Energy labelling Supplier NIBE Model VPD10 150R VPD10 300R Energy efficiency class Heat loss Volume VPD 150, 300 Chapter 4 | Technical data...
-
Page 15: Contact Information
Tel: +7 831 419 57 06 E-mail: kuzmin@evan.ru www.nibe-evan.ru NIBE AB Sweden, Box 14, Hannabadsvägen 5, SE-285 21 Markaryd Tel: +46 (0)433 73 000 E-mail: info@nibe.se www.nibe.se For countries not mention in this list, please contact Nibe Sweden or check www.nibe.eu for more information. - Page 16 WS name: -Gemensamt WS version: a389 (working edition) Publish date: 2017-05-24 07:22 NIBE AB Sweden Hannabadsvägen 5 Box 14 SE-285 21 Markaryd info@nibe.se www.nibe.eu 431365...