Resetting Faults; Maintenance; Disposal; Technical Specifications - Truma iNet X Operating Instructions Manual

The connection can be made via the Truma iNet X or via
the mobile device with the help of the App.
– Follow the instructions of the set-up wizard on the screen.

Resetting faults

If a fault occurs in a connected appliance, this is shown on the
Truma iNet X.. Solutions to rectify the fault are suggested in
the display. The fault can then be reset with the Truma iNet X.

Maintenance

The Truma iNet X requires no maintenance. Use a damp,
non-scouring cloth to clean the front panel. If this is not suffi-
cient, use a neutral soap solution.

Disposal

Neither the appliance nor the batteries may be disposed
of with domestic refuse, instead they must be sent for
recycling separately via a collection point. By doing this
you are contributing towards reuse and recycling. National
regulations and laws must be observed.
6 EN

Technical specifications

Display (touch)
Operating temperature
range
Storage temperature
range
Interfaces
Power supply
Power consumption
Weight
Protection class
Protection type
Subject to technical changes.
TFT-LCD 4.3" (resistive)
-30 °C to +70 °C
-30 °C to +70 °C
TIN bus, CI bus, CAN bus
Bluetooth Low Energy (BLE)
8 V – 16 V
typ. 1.5 W
approx. 150 g
Class III
IP 10