Switching Off; Standby Mode; Restarting The Control Panel; Operation - Truma iNet X Operating Instructions Manual

Switching off

The Truma iNet X can be put into stand-by mode or switched
off using the menu on the dashboard .
If the Truma iNet X is switched off, all connected heating
and air conditioning systems are also switched off.

Standby mode

If there is no input for a certain time, the display switches off
automatically to save power. If the Truma iNet X is in standby
mode, the connected appliances can still be controlled via the
App.
You can also press the Home button longer to put the
control panel in standby mode.
If the Truma iNet X is in standby mode, briefly press
the Home button or the Back button to activate the
Truma iNet X. After a few seconds the lock screen is displayed.
Press again to unlock the display and show the dashboard.

Restarting the control panel

Press and hold the Home button and the Back button togeth-
er to restart the control panel.

Operation

Touchscreen

The control panel is operated with your fingers via the
touchscreen.

App control (Bluetooth)

The Truma iNet X can also be connected to a mobile device
(smartphone / tablet) with Bluetooth so that connected appli-
ances can be controlled with the App .
Depending on the operating system, the App must be in-
stalled on the mobile device from the Google Playstore
( Android) or App Store (iOS) in order to use this function.
Only a limited number of mobile devices can be stored in the
Truma iNet X. The stored mobile devices can be managed via
the Truma iNet X.
Only one mobile device at a time can be connected with
the Truma iNet X and be used to control appliances.
If you encounter problems with the App, check that you
have the latest version and, if not, update it.

Connection with mobile devices

– Enable Bluetooth on the mobile device. If you have any
questions with regard to the settings of your mobile device,
contact the manufacturer.
EN 5