Installing The Cable Sheath; Figure 1-14 Irrigation Tube Linked To The Wedges - Olympus HST-Lite User Manual

1.6

Installing the Cable Sheath

To install the cable sheath
1. Unfasten the handle hook and loop strips.
2. Bundle up the probe cables, wheel encoder cable, irrigation tube, and
preamplifier cables (if installed).
3. Install the draw-in tool on the cable and tube bundle. The pointed end of the
draw-in tool should point away from the scanner (see Figure 1-15 on page 20).

Figure 1-14 Irrigation tube linked to the wedges

DMTA-20045-01EN, Rev. A, October 2012
HST-Lite Scanner 19