Huawei SmartAX MA5612 Maintenance Manual page 162

SmartAX MA5612 Multi-service Access Module
Maintenance Guide
Issue 01 (2012-07-25)
Possibl Judgment Criterion
e
Cause
belongs igmp program vlan command on
. the ONU.
The If one of the following symptoms
multica occurs, the fault is because the multicast
st user user does not have the permission to
does not order certain types of programs.
have the
l The ONU receives the report packet
permiss
and displays "the number of the
ion to
grade program that the user is
order
allowed to watch has reached
certain
maximum".
types of
l The maximum number (watch
progra
limit) of programs at a level that can
ms
be watched by the user is 0 by
(such as
running the display igmp user
HDTV)
extended-attributes user-index
.
command on the ONU.
NOTE
If the maximum number of the programs at
a certain level is 0, the user cannot order any
programs at this level. That is, the user's
permission to the programs of the
corresponding type is restricted. For
example, if HDTV watch limit is 0, the
user cannot watch HDTV programs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Troubleshooting Services Transmitted Through a GPON
Troubleshooting Method
Choose one of the following
troubleshooting methods
according to the purchased service
type:
l Notify the user of ordering
l Set the permission for ordering
NOTE
You can run the igmp user watch-
limit command on the ONU to set the
number of programs at each level that
a user can watch.
address range of
program groups that can
be generated
dynamically in the
MVLAN, and ensure
that the IP address range
includes the IP address
of the ordered program.
another program (the maximum
number of the programs at this
level must not be 0) because the
user does not have the
permission to watch the ordered
program.
the programs at this level for the
user so that the user can order
the program.
Port
153