9.5
Heat Sink Removal
The instructions in this section describe the process of removing a processor heat sink. The process
described is for reference purposes only. The installed heat sink on the server board may be different.
Required Tools and Supplies
•
Anti-static wrist strap and conductive foam pad (recommended)
•
Phillips* head screwdriver
1. Remove the fan cable from the 4-pin processor fan connector labeled "CPU_Fan" on the server board.
1. Using a Phillips head screwdriver, loosen the screws on the head of the 4 push pins (see letter A).
2. Carefully lift the push pins to detach the heat sink from the server board (see letter B).
3. Lift the heat sink from the server board (see letter C).
42
Intel® Server Board M10JNP2SB User Guide
Figure 27. Removing the fan cable
Figure 28. Removing the heat sink