Bottom cover
Table 5-1
Bottom cover descriptions and part numbers
Description
Bottom cover for use in models without WWAN
Bottom cover for use in models with WWAN
Before removing the bottom cover, follow this step:
Prepare the computer for disassembly
▲
Remove the bottom cover:
1.
Loosen the five captive Torx T5 screws that secure the bottom cover to the computer.
2.
Insert a non-marking, non-conductive tool at the hinges and separate the bottom cover from the
computer (1).
(Preparation for disassembly on page
Spare part number
L56448-001
L56449-001
30).
Component replacement procedures
31