Fan - HP EliteBook x360 830 G5 Maintenance And Service Manual

Fan

Table 6-7 Fan description and part number
Description
Fan
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery (see
TIP:
You do not have to remove the fan to remove the system board. You can remove the fan with the
system board still installed.
Remove the fan:
1. Disconnect the fan cable from the system board (1).
2. Remove the three Phillips M2.5 × 3.5 screws (2) that secure the fan to the computer.
3. Remove the fan from the computer (3).
Reverse this procedure to install the fan.
50 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 33).
42).
31).
Spare part number
L56444-001