Download Print this page
Skope SKT500W Series User Manual

Skope SKT500W Series User Manual

Advertisement

Quick Links

SKT500W Series
User Guide
Thank you for purchasing a SKOPE refrigeration product.
Safety
Always observe safety precautions when using any electrical appliance. Read these instructions carefully and retain them
for future reference.
WARNING
• Ensure the appliance is disconnected from the power supply before performing any cleaning or maintenance.
• Do not cover the grilles or block the entry or exhaust of airflow by placing objects up against the refrigeration unit.
• Should manual defrosting be necessary, turn off the refrigeration system and allow the ice to melt by air
circulation. Do not use mechanical methods to remove ice, as this may damage the refrigeration circuit.
• Do not use any electrical devices or appliances inside the food storage compartment.
Do not use this appliance for other than its intended use.
Do not probe any opening.
Only use this appliance with the voltage specified on the cabinet rating label.
Ensure the appliance has adequate ventilation as this is essential to economical, high performance.
Be careful not to touch moving parts and hot surfaces.
For your own safety and that of others, ensure that all electrical work is done by authorised personnel.
If the power supply flexible cord becomes damaged, it must be replaced by an authorised service agent or similarly qualified
person in order to avoid a hazard.
Ensure all necessary safety precautions are observed during installation or removal of the refrigeration unit.
The appliance is not designed to be stable while in motion. Use extreme caution when moving or transporting it.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
Do not exceed a maximum load of 20kg per shelf.
Please contact SKOPE for advice regarding disposal of this appliance.
WARNING
• Both stabiliser feet MUST be screwed down to firmly contact the floor at the place of installation.
This cabinet is designed to operate within a specific climatic class environment.
See the cabinet rating label inside the cabinet for climate class number.
Climate class
Ambient temperature
3
25°C
4
30°C
5
40°C
7 (tropical)
35°C
Service & Support
We know you will get years of satisfaction from your new SKOPE product when you follow a few simple preventative
maintenance guidelines.
Helpful information is available on our website
www.skope.com/serviceandsupport
Relative humidity
60%
55%
40%
75%
Refrigeration
Refrigeration

Advertisement

loading
Need help?

Need help?

Do you have a question about the SKT500W Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Skope SKT500W Series

  • Page 1 Relative humidity 25°C 30°C 40°C 7 (tropical) 35°C Service & Support We know you will get years of satisfaction from your new SKOPE product when you follow a few simple preventative maintenance guidelines. Helpful information is available on our website www.skope.com/serviceandsupport...
  • Page 2 SKT500W Series Refrigeration Refrigeration Installation Guidelines When installing this fridge, ensure the installation guidelines below are considered and met Surface Climate Class Stabiliser Feet Ventilation Door Opening The installation surface Allow adequate space for The fridge must be installed To provide adequate...
  • Page 3 SKT500W Series Refrigeration Refrigeration Door Handles The door handles may be packed inside the fridge. To fit door handle To remove door handle A metal spring is fitted inside the Peel back the door gasket from Bracket handle mounts. Ensure the springs behind the handle mounts on the point up.
  • Page 4 Wipe the inside and outside of the cabinet with a damp cloth, taking care to keep moisture away from electrical parts. The condenser coil must be kept clean. SKOPE strongly urges monthly cleaning of the condenser coil. Do NOT use hard or sharp tools to clean the coil as these may cause damage.

This manual is also suitable for:

Skt500xw