Download Print this page

Advertisement

Quick Links

EziCore TCE and BCE Series
User Guide – EziCore TCE and BCE Series
Thank you for purchasing a SKOPE refrigeration product.
Safety
Always observe safety precautions when using any electrical appliance. Read these instructions carefully and retain them for future
reference.
WARNING
Ensure the appliance is disconnected from the power supply before performing any cleaning or maintenance.
Do not cover the grilles or block the entry or exhaust of airflow by placing objects up against the refrigeration unit.
Should manual defrosting be necessary, turn off the refrigeration system and allow the ice to melt by air circulation. Collect ice
and water during defrost to prevent a slip hazard. Do not use mechanical methods to remove ice, as this may damage the
refrigeration circuit.
Do not use any electrical devices or appliances inside the food storage compartment.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Do not use this appliance for other than its intended use.
Do not insert fingers/foreign objects into any holes.
Only use this appliance with the voltage specified on the cabinet rating label.
Ensure the appliance has adequate ventilation as this is essential to economical, high performance.
Be careful not to touch moving parts and hot surfaces.
For your own safety and that of others, ensure that all electrical work is done by authorised personnel.
If the power supply flexible cord becomes damaged, it must be replaced by an authorised service agent or similarly qualified
person in order to avoid a hazard.
Ensure all necessary safety precautions are observed during installation or removal of the refrigeration unit.
The appliance is not designed to be stable while in motion. Use extreme caution when moving or transporting it.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
Do not exceed a maximum load of 20 kg per shelf.
If the cabinet is to be scrapped, ensure the cabinet is unplugged from the power supply and cut off the mains flex close to the
back of the cabinet. Be mindful of the risk of animals or children becoming trapped in the appliance – either remove or secure
doors if necessary.
Refrigerant must be removed by a qualified service person and the cabinet recycled/disposed of in accordance with local
regulations.
WARNING
Ensure the doors are held shut when moving or transporting the cabinet.
This cabinet is designed to operate within a specific climatic class
environment.
See the cabinet rating label inside the cabinet for climate class number.
Climate class
Ambient
temperature
3
25°C
4
30°C
5
40°C
7 (tropical)
35°C
Service and Support
We know you will get years of satisfaction from your new SKOPE product when you follow a few simple preventative maintenance
guidelines. Helpful information is available on the SKOPE website.
www.skope.com/serviceandsupport
PRN80362 Rev. 1.0 Aug. 2022
The cabinet includes relevant hazard symbols that may be
associated with the cabinet. Refer to the information below for
symbol description.
Relative humidity
60%
55%
40%
75%
WARNING
The refrigeration system contains flammable R290
refrigerant. Do not tamper with it.
The refrigeration system must only be serviced by qualified
personnel.
Page 1 of 4

Advertisement

loading
Need help?

Need help?

Do you have a question about the EziCore TCE Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Skope EziCore TCE Series

  • Page 1 7 (tropical) 35°C Service and Support We know you will get years of satisfaction from your new SKOPE product when you follow a few simple preventative maintenance guidelines. Helpful information is available on the SKOPE website. www.skope.com/serviceandsupport PRN80362 Rev. 1.0 Aug. 2022...
  • Page 2 EziCore TCE and BCE Series Installation Guidelines Ensure you consider and meet the installation guidelines. Ventilation Surface Door Opening Climate Class Ensure a minimum of The installation Allow adequate space The cabinet must be surface must be installed in an 300 mm clearance for the door/s to open above the cabinet.
  • Page 3 EziCore TCE and BCE Series Automatic Start-up After the cabinet has been installed, plug it in and check the following activity. Item Activity Electronic An electronic controller runs the fridge and is visible in a cutout below the sign. The display panel on the electronic controller controller shows the cabinet’s internal temperature.
  • Page 4 Wipe the inside and outside of the cabinet with a damp cloth, taking care to keep moisture away from electrical parts. The condenser coil must be kept clean. SKOPE strongly urges cleaning the condenser coil every month. Do NOT use hard or sharp tools to clean the coil as these may cause damage.