4. Video Doorbell Setup for iPhone
This section is for iPhone only. For Android device,
please refer to section 5.
1. Fully charge the doorbell by plugging it into a power source
with the USB cable provided. The indicator light will become
steady blue once fully charged (Please refer to Section 2).
2. Power On, then open the App and tap "+"
OFF ON
3.Tap "Search Network"
-3-
TM
Tap "Connect to Wifi"
4 .Follow the in-app instructions . Press and hold the Call
Button for 5 seconds and the doorbell light will start blinking.
5. In your phone's Settings, select and connect to the Wifi named
"Wifi_Doorbell_AP". Please wait as it may take some time to
detect and show this Wifi.
-4-