Video Doorbell Setup For Android Device - Emerson ER107001 Owner's Manual

5. Video Doorbell Setup for Android Device

TM
This section is for Android device only. For iPhone, please
refer to section 4.
1. Fully charge the doorbell by plugging it into a power source
with the USB cable provided. The indicator light will become
steady blue once fully charged (Please refer to Section 2).
2. Power On, then open the App and tap "+"
OFF ON
3. Your phone should be connected to the 2.4 GHz Wifi during
setup.
4. Tap "Search Network"  Tap "Connect to Wifi"
-7-
5. Follow the in-app instructions . Press and hold the Call Button
TM
for 5 seconds and the doorbell light will flash. Tap "Next".
6. Enter Wifi password and tap "Next" to proceed. To use different
Wifi network, tap as indicated to search (2.4GHz Wifi only).
-8-