Cleaning And Maintenance; Troubleshooting; Technical Data - ElectrIQ EIGH8TBVW User Manual

CLEANING AND MAINTENANCE

ATTENTION: Please shut off the unit and unplug from the mains before cleaning or
performing any maintenance.
CLEANING THE SURFACE
• Clean the heater with a duster or a soft wet cloth.
Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may
cause irreversible damage. Make sure no water enters the control panel or gaps in the
casing.
• Do not run the unit until completely dry.
• Place the heater in its original box or cover to protect it from dust when not in use.
• Store it in a cool dry place.

TROUBLESHOOTING

Do not repair or disassemble the unit by yourself, unauthorized repair attempts will
invalidate the warranty and may cause bodily harm.
Issue Possible Reason
No power 1. Power cord is unconnected
2. There is no power from socket
3. The power switch on the rear of the unit
is turned off.
Odour 1. New unit. When the unit is used for the
emission first time the fan motor may produce and
from unit odour which will dissipate within a week of
use
Strong 1. Unit is not placed on a flat surface
vibrations 2. Unit may be damaged
and noise
If the above solutions do not resolve the problem please contact the service centre.

TECHNICAL DATA

Model no.
Voltage
Power
Frequency
IP Rating
17
Solution
1. Connect the power cord
2. Check socket is turned on
3. Ensure the power switch on
the rear of the unit is in the on
position
1. No action required
1. Place on a flat surface. May
put an
underneath
2. If the heater is damaged
discontinue use and contact the
service centre.
EIGH8TBVW
220V-240V
850W
50 / 60 Hz
IP24
anti-vibration mat