Page 1
Thank you for choosing electriQ Please read this user manual before using this heater and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals THIS PRODUCT IS ONLY SUITABLE FOR WELL INSULATED SPACES OR OCCASIONAL USE...
CONTENTS SAFETY INSTRUCTIONS FEATURES DIAGRAM OPERATION CONTROL PANEL AND SETTINGS REMOTE CONTROL MAINTENANCE TROUBLE SHOOTING TECHNICAL DATA SUPPORT PRODUCT FICHE Page 2 of 10...
SAFETY INSTRUCTIONS Important! Carefully read the instructions before operating the unit This appliance is for indoor use only. Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. Installation must be in accordance with regulations of the country where the unit is used.
Page 4
The heater is designed to be used at temperatures above -20°C. If it is exposed to temperatures below this, it must be allowed to warm above this level before operation. Do not attempt to repair, disassemble or modify the appliance. This unit contains no user-serviceable parts.
BLADELESS HEATER FEATURES Slim design takes minimal space High Speed Motor with Fan mode and 2 Heat settings Swing Function 12 hour standby timer. Remote Control allowing all functions to be changed. Built in ambient light.
OPERATION Your heater may be operated by using either the manual controls located on the front of the fan or by your remote control. POWER SWITCH ON THE BACK OF THE UNIT Used to turn the bladeless heater ON and OFF. This should be used to turn off the appliance before leaving unattended.
REMOTE CONTROL Your bladeless heater is supplied with a remote, which allows full control of all the unit’s functions. ON/OFF: Turns the fan On and Off MODE: Cycles between Fan, Low Heat and High Heat. TIMER: Press repeatedly to set the Off timer in 1 hour intervals.
MAINTENANCE CLEANING AND STORAGE ATTENTION: Please shut off the unit and unplug from the mains before cleaning or performing any maintenance. Cleaning the surface Clean the heater with a duster or a soft wet cloth. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage.
TECHNICAL DATA Model eiQ-AM09 / eiQ-AM09B Cable length 1.5 meters Rated Input 2 KW Power Supply 220-240V/50Hz Net Weight 3.0Kg Dimensions 570mm x 290mm x 170mm electriQ UK SUPPORT www.electriQ.co.uk/support Please, for your own convenience, make these simple checks before calling the service line.