ElectrIQ EIGH8TBVW User Manual page 15

AUTOMATION
Automation allows an automatic action to be set up for the device. This can be triggered by the
Time, and a range of other influences, depending what other TUYA enabled devices you have on
the network.
1. Press on the Scene tab at
the bottom of the Home
screen
6. Chose the function,
set the value for the
function, and then press
the back button in the
top right corner, to
return to the previous
screen.
2. Press on the Automation
tab at the top of the screen.
4. Setup is very similar to the scene
setup on the previous page, and
includes an extra section for
specifying a trigger for the scene to
start.
Press the Pen next to "Please Enter
Scene Name" to input the name for
your Scene
Press the Red Plus next to "When
any condition is satisfied" to add the
trigger
Press the Red Plus next to "Execute
following actions" to add the action
required. Then select the heater
from the list of devices.
15
3. Press on the + at the top of
5. Select the condition when the
automation should start. A
number of triggers can be
combined.
7.
Once all the functions required have been
added, press the Save button in the top right
corner to finalize and save your new scene.
The automation is now set up, it can be turned on
and off using the toggle on the home page.
the screen or press on Add
Automatic Action