Thermocouple And Rtd Connections - Siemens SITRANS RD200 Operating Instructions Manual

Voltage input connections
①
②
③
④
⑤
The meter is capable of accepting any voltage from -10 V DC to +10 V DC.
5.5

Thermocouple and RTD connections

The following figures show examples for thermocouple and RTD connections.
The RTD/TC selector switch must be set to the proper position for the meter to accept the
selected temperature input.
The input type is selected using the Setup (
Selected thermocouple input must correspond to thermocouple sensor and wire type used.
SITRANS RD200
Operating Instructions, 05/2019, A5E47629414-AA
Signal connector
24 V out
Signal
3-wire voltage transducer
Voltage signal
5.5 Thermocouple and RTD connections
SEtu
) menu.
Connection
17