Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6015T-T/6015T-
INF. Installation and maintenance should be performed by experienced technicians
only.
The SuperServer 6015T-T/6015T-INF is a 1U Twin (two serverboards in a 1U chas-
sis) rackmount server based on the SC808T-980 server chassis and two Super
X7DBT-T/X7DBT-INF serverboards. The X7DBT-T/X7DBT-INF supports dual Intel®
Xeon® 5300/5100 Series processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X7DBT-T/X7DBT-INF
serverboard and the SC808T-980 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6015T-
T/6015T-INF into a rack and check out the server confi guration prior to powering
up the system. If your server was ordered without the processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface
Advertisement
Table of Contents
