X7Dbt-T/X7Dbt-Inf Quick Reference - Supero SUPERSERVER 6015T-INF User Manual

X7DBT-T/X7DBT-INF Quick Reference

Jumper Description
JBT1 CMOS Clear
2 2
JI C1/JI C2 I2C to PCI-Express Slot
JPG1 VGA Enable
JPL1/ JPL2 LAN1/LAN2 Enable/Disable
JWD (JWD) Watch Dog
Connector
ATX Power 1
ATX Power 2
COM2
FAN 1-6
Infi niBand*
J17
J18
JF1
JL1
JOH1
JP10
2
JPI C
JWOL
JWOR
LAN1/2
SATA0-SATA3
SGPIO
SIMSO IPMI
USB0/1
USB2/3
LED Indicator
LE1
LE2*
LE3*
*X7DBT-INF only
Note: the "Primary ATX Power Header" is used to supply power to the primary
serverboard and the "Secondary ATX Power Header" is used to supply power to
the secondary serverboard. Connect the power supply to only one of these on both
boards (primary = left, secondary = right when viewed from front of server).
Chapter 5: Advanced Serverboard Setup
Description
20-Pin ATX PWR Connector (for Primary Board)
20-Pin ATX PWR Connector (for Secondary Board)
COM2 Serial Port/Header
Chassis and CPU Fan Headers
Infi niBand Connector
System Management Power (I
System Management Bus Header
Front Control Panel Connector
Chassis Intrusion Header
Overheat LED Header
4-pin Auxiliary Power Connector (for HDDs)
System Management Power (I
Wake-on-LAN Header
Wake-on-Ring Header
Gigabit Ethernet Ports
Intel SATA 0-3 Ports
Serial ATA General Purpose Input/Output Header
SIMSO IPMI Socket
USB0/1 Ports
USB0/1 Headers
Description
Onboard Power LED Indicator
Infi niBand Link LED (green)
Infi niBand Activity LED (yellow)
5-11
Default Setting
See Section 5-10
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
2 C) Header
2
C) Header