Table of Contents
Advertisement
5
TROUBLESHOOTING, CARE AND MAINTENANCE
5.1
General Instructions
⚠
WARNING
+
Do not make any improper changes to the equipment.
CAUTION
⚠
+
Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑ ATTENTION
+
In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2
Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Error
Cracking near the
pedal
Equipment wobbles
Handlebar/saddle
wobbles
Display does not turn
on
No pulse reading
Cause
Loose pedals
Equipment is not level
Screws are loose
Power supply disrupted
+
Sources of interference
in the room
+
Unsuitable chest strap
+
Chest strap is incorrectly
positioned
+
Empty batteries
Repair
Tighten the pedals
Adjust the supporting feet
Tighten screws
Check all screw connections and see if
the plug is plugged in
+
Eliminate sources of interference (e.
g. mobile phone, loudspeaker, etc.)
+
Use a suitable chest strap (see
recommended accessories)
+
Reposition the chest strap and/or
moisten the electrodes
+
Change the batteries
31
Advertisement
Table of Contents
