CARDIO STRONG Ergometer BX90 Assembly And Operating Instructions Manual page 18

Table of Contents

Advertisement

Step 10
1.
Plug the AC ADAPTOR [715] into the
mains power socket.
2.
Connect the ADAPTOR [715] into the
ADAPTOR SOCKET at the front of the
machine.
3.
The COMPUTER [718] should now
be working. If not the re-plug all the
COMPUTER CABLE as shown in steps 8,
9 & 10.
NOTICE:
L
BEFORE YOU START - Recharge the
Battery because your exercise machine
is NEW!
The BATTERY needs to be Charged.
The battery pack was fully charged when
this exercise machine was manufactured.
however since then the battery pack
has undoubtedly lost some or all of it's
charge making it important to recharge
the battery pack ASAP. Use the provided
AC Adaptor to recharge the battery for at
least 30 minutes or longer.
NOTICE:
L
Disconnect the ergometer from the power supply
It is important that you disconnect the ergometer from the power supply after it has been
charged. After a long period of non-use the ergometer has to be charged again.
18
715
 
BX90

Advertisement

Table of Contents
loading

Table of Contents