Table of Contents
Advertisement
Step 3
1.
Assemble the STABILIZER-BACK [004]
with 2 x BOLT [300] tighten firmly.
2.
Remove the polystyrene block and place
it under the front end of the machine.
Step 4
1.
With the front end now raised off the
floor remove packing material.
2.
Undo 2 x BOLT and remove the
transportation tube.
Step 5
1.
Assemble the STABILIZER-FRONT [003]
with 2 x BOLT [300] tighten firmly.
706
706
300
003
300
004
15
Advertisement
Table of Contents
