2.4
Assembly instructions
Before starting assembly, look carefully through the individual assembly steps shown
and assemble the equipment in the order indicated.
Step 1
1.
Use a sharp knife, open the carton and lay it flat on the
floor.
2.
Remove all loose components.
3.
Refer to the checklist and check that everything is
present.
NOTICE:
L
To protect the BX90 while assembling we suggest that
you do not remove the Protective Packing Material
until it is absolutely necessary.
Step 2
1.
Lift the rear of the machine off the floor
and slide a polystyrene block under
the rear-end remove packing material.
2.
Undo 2 x BOLT and remove the
transportation tube.
14
BX90