Configuring The Sd Card - Huawei IPC1801-Z36 User Manual

IPC1801-Z36&2802-Z18&5802-Z20
User Guide
Step 2 Select Enable Privacy Masking.
Step 3 Press and hold the left mouse button, and drag on the preview image to cover the part to be
masked.
Step 4 Click OK.
The message "Privacy Mask Updated" is displayed.
Step 5 Click OK.
The system automatically saves the settings.
----End

5.10 Configuring the SD Card



Procedure
Step 1 Choose SD Card.
The SD Card Information page is displayed, as shown in Figure 5-10.
Figure 5-10 SD card information page
Issue 12 (2014-06-12)
 You can right-click the image to clear masked areas.
 The maximum percentage of an image that can be masked depends on the device model. Read the
tip displayed on the page. A maximum of five areas can be masked.

You can also click Clear to configure the masked areas again.
Please use the normal SD card the regular manufacturers produced, or it will cause the
device restart.
Configuring the SD card will cause the data missing, please backup the data when
formating the SD card is used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
37