Setting Smtp Parameters - Huawei IPC1801-Z36 User Manual

IPC1801-Z36&2802-Z18&5802-Z20
User Guide

7.4.3 Setting SMTP Parameters

Description
If the Simple Mail Transfer Protocol (SMTP) function is enabled, the device automatically
sends JPG images and alarm information to specified email addresses when an alarm is
generated.
Procedure
Step 1 Choose Service Center > SMTP.
The SMTP page is displayed, as shown in Figure 7-8.
Figure 7-8 SMTP page
Step 2 Set the parameters according to Table 7-3.
Issue 12 (2014-06-12)
Parameters marked with
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
are mandatory.
7 Alarm Configuration
60