IPC1801-Z36&2802-Z18&5802-Z20
User Guide
Parameter
Row
Column
Step 4 Click OK.
The message "OSD Parameter Updated" is displayed.
Step 5 Click OK.
The system automatically saves the settings
----End
5.5 Configuring the Microphone
Description
On the Microphone page, you can set the microphone input mode and volume.
Procedure
Step 1 Choose Device Configuration > Microphone.
The Microphone page is displayed, as shown in Figure 5-5. Table 5-5 describes the
parameters.
Issue 12 (2014-06-12)
Description
Row where the information starts to
display.
Column where the information starts
to display.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Setting
[Setting method]
Enter a value manually.
[Default value]
0 (original point)
[Setting method]
Enter a value manually.
[Default value]
0 (original point)
NOTE
The default value of the
time column is 1.
32