Huawei IPC1801-Z36 User Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Security Camera
  5. IPC1801-Z36
  6. User manual
Huawei IPC1801-Z36 User Manual

Huawei IPC1801-Z36 User Manual

Network high speed dome
Hide thumbs Also See for IPC1801-Z36:
Table of Contents

Advertisement

Quick Links

Download this manual
IPC1801-Z36&2802-Z18&5802-Z20
V100R001C03SPC600
User Guide
Issue
12
Date
2014-06-12
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei IPC1801-Z36

Summary of Contents for Huawei IPC1801-Z36

  • Page 1 IPC1801-Z36&2802-Z18&5802-Z20 V100R001C03SPC600 User Guide Issue Date 2014-06-12 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.

  • Page 3: About This Document

    This document is a user manual for Network High Speed Dome, including the product features, hardware installation, network access, network configuration, daily maintenance, and troubleshooting. This document applies to IPC2802-Z18, IPC5802-Z20, and IPC1801-Z36. Intended Audience This document is intended for: ...

  • Page 4: Change History

    Modified the privacy masking page. 6.1 Setting Local Network Parameters Modified the local network page and description of parameters. Deleted 9.3.1 Configuring a Permission Group Deleted the permission group parameters table. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 5 7.3 Setting Motion Detection Alarm Linkage Parameters Modified Setting Motion Detection Alarm Linkage Parameters 7.4.1 Configuring the Alarm Reporting Interval Modified the motion detection alarm latch. 9.2 Querying Device Logs Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 6 This issue is the fifth official release, compared to issue 04: Added 4.4 Controlling and Configuring the PTZ Added description about special preset. Modified About This Document Updated special notices. 2.2 Features Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 7 Added description about lightening protection measures and working high above the ground. 2.2 Features Added description about the security features. 6.3.2 Setting Security Authentication Added description about security authentication. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 8 The device may be upgraded without prior notice. To download the latest program and supplementaty documentation, visit http://support.huawei.com/enterprise Product Support > Unified Communications and Collaboration > Video Surveillance > Cameras > Specialty Cameras > IPE. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 9: Table Of Contents

    5.10 Configuring the SD Card ............................37 6 Network Configuration ......................39 6.1 Setting Local Network Parameters ..........................39 6.2 Configuring Device Ports ............................42 6.3 Setting Platform Parameters ............................43 Issue 12 (2014-06-12) Huawei Proprietary and Confidential viii Copyright © Huawei Technologies Co., Ltd.
  • Page 10 9.6 Restarting a Device ..............................77 9.7 Restoring a Device to Factory Settings ........................77 9.8 Collecting Logs................................78 10 Troubleshooting ........................80 11 Technical Specifications ......................82 Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 11: Safety Precautions

    The actual device governs, and this document is only for reference.  The device may be upgraded without prior notice.  For the latest programs and supplementary documentation, contact Huawei customer service center.  If any problems occur during use, contact the supplier or customer service center.

  • Page 12: Precautions For Use

    Deploy surge protection devices if the device is installed outside.  When working high above the ground, take security measures, such as wearing helmets and safety belts and choosing secure elevating apparatus. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 13 IPC1801-Z36&2802-Z18&5802-Z20 User Guide 1 Safety Precautions Personnel Precautions The device-related installation and maintenance can only be performed by professional technical engineers or specific installation personnel. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 14: Overview

    Figure 2-1 shows the appearance of a Network High Speed Dome. Figure 2-1 Network High Speed Dome Figure 2-2 shows the structure diagram of a Network High Speed Dome. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 15 Figure 2-2 Structure diagram of a Network High Speed Dome Figure 2-3 shows the multi-head cable used by a PTZ camera. Table 2-1 describes cores of the multi-head cable. Figure 2-3 Multi-head cable Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 16: Function Description

    Network port Connects a standard Ethernet cable. Figure 2-4 shows the location of SD card slot and reset button. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 17: Features

    I/O Features  Support bidirectional intercom and unidirectional broadcast.  Supports RS-485 serial port control and transparent channel transmission.  Provides a 10/100 Mbit/s self-adaptive Ethernet port. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 18: Other Features

    Software packages and upgrade packages have been scanned by anti-virus softwares (such as Symantec, Trend officeScan, Mcafee, Avira AntiVir, Kaspersky, etc.), and the scanning results are provided in the version description document. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 19: Hardware Installation

    Figure 3-1, Figure 3-2, and Figure 3-3. In this document, we take wall-mounted installation mode for example, and other installation mode, please refer to Installation Guide for details. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 20 IPC1801-Z36&2802-Z18&5802-Z20 User Guide 3 Hardware Installation Figure 3-1 Wall-mounted installation (unit: mm) Figure 3-2 Suspension installation (unit: mm) Figure 3-3 Embedded installation (unit: mm) Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 21: Installing A Ptz Camera In Wall-Mounted Mode

    Figure 3-5. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 22 Figure 3-5 Fix the bracket and PTZ camera together Step 5 Mounting the PTZ camera installed with the wall-mounted bracket to the wall, tighten the four screws fixing the bracket well onto the wall. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Quick Access

    Step 1 Open Internet Explorer, enter the IP address of the IP camera (default value: 192.168.0.120) in the address box, and press Enter. The login page is displayed, as shown in Figure 4-1. Figure 4-1 Login page Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 24: Main

    Figure 4-2 shows the main page layout. Table 4-1 describes the elements on the main page. Figure 4-2 Main page layout Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 25 You can click this button to change the password. Fault icon When the SD card encounters an exception, the fault icon is displayed. You can click to view the fault information. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 26: Browsing Videos

    Download unsigned ActiveX controls and Initialize and script ActiveX controls not marked as safe for scripting under ActiveX controls and plug-ins to Enable, as shown in Figure 4-4. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 27 ----End Description To browse real-time videos, click Live Video. The Live Video page is displayed, as shown in Figure 4-5. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 28 To set sensor parameters, choose Sensor Config from the shortcut menu. On the Sensor Config page, you can adjust the image, mirror, camera mode, focus setting, Iris setting, white balance, and noise filteras prompted. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 29: Controlling And Configuring The Ptz

    Table 4-2 PTZ control buttons Button Description Zoom Click to zoom the lens in or out. Focus Click to adjust the focal length. Iris Click to adjust the auto aperture. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 30 You can configure preset positions and quickly rotate the camera to a preset position by invoking the preset position. The procedure is as follows: Step 1 Configure a preset position. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 31 Call 97 preset Run the first scan set. Set 97 preset Show the ptz version. NOTE IPC1801-Z36 does not support showing the ptz version. The 97 preset is used only as normal preset. Call 99 preset 360° rotating scan. Set 250 preset Enable the temperature displayed.
  • Page 32 Step 3 Invoke a track. Select a track name from the Track drop-down list box to invoke the track. A maximum of six tracks can be configured. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 33: Device Configuration

    When the device is upgraded, the device information is updated automatically. Procedure Step 1 Click Device Info. The Device Info page is displayed, as shown in Figure 5-1. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 34 The device ID or name cannot exceed 32 bytes; otherwise, the modification fails. Device Type [Setting method] These parameters cannot be Product Model modified. MAC Address Hardware Version Software Version Video Channel(s) Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 35: Setting Video And Audio Stream Parameters

    Step 1 Click Stream Configuration. The Stream Config page is displayed, as shown in Figure 5-2. Figure 5-2 Stream Config page Step 2 Set the parameters according to Table 5-2. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 36 IP packets. It supports packet transmission, video stream transmission, and different codec levels based on network resources. H.264 features high and stable image quality, high compression ratio, and good network suitability. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37 I frames do not require other frames to decode. [Setting method] Interval A smaller I frame interval means better video quality Select a value but higher bandwidth. from the drop- down list box. [Default value] Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 38: Setting The Channel Name, Video System, And Source Resolution

    5.3 Setting the Channel Name, Video System, and Source Resolution Procedure Step 1 Choose Device Configuration > Camera. The Camera page is displayed, as shown in Figure 5-3. Figure 5-3 Camera page Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 39 If the video system and source resolution are modified, the message "Parameter Updated! Effective After Restart" is displayed, and the system automatically saves the settings. The settings take effect after the device restarts. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 40: Setting Osd Parameters

    The OSD page is displayed, as shown in Figure 5-4. Figure 5-4 OSD page Step 2 Set the OSD font. The OSD font is set as Auto by default. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 41 The origin point is located in the  Enter a value within the upper left corner of the video length of 0 to 32 window. characters in Custom OSD. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 42: Configuring The Microphone

    On the Microphone page, you can set the microphone input mode and volume. Procedure Step 1 Choose Device Configuration > Microphone. The Microphone page is displayed, as shown in Figure 5-5. Table 5-5 describes the parameters. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 43 0 to 100. [Default value] Step 2 Click OK. The message "Microphone Parameter Updated" is displayed. Step 3 Click OK. The system automatically saves the settings. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 44: Configuring The Dome Ptz Address

    Description When the analog output function is enabled, the IP camera can send analog signals to a video server or display device through the VIDEO OUT port. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 45: Configuring The System Language And Web Mode

    Procedure Step 1 Choose Device Configuration > System Configuration. The System Configuration page is displayed, as shown in Figure 5-8. Figure 5-8 System Language page Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 46: Configuring The Privacy Mask Function

    5.9 Configuring the Privacy Mask Function Procedure Step 1 Click Blind Area. The Privacy Masking page is displayed, as shown in Figure 5-9. Figure 5-9 Privacy Masking page Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 47: Configuring The Sd Card

    SD card is used. Procedure Step 1 Choose SD Card. The SD Card Information page is displayed, as shown in Figure 5-10. Figure 5-10 SD card information page Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 48 ----End Result After finishing format, the message of “Disk format is successful” is displayed. Click OK. Disk capability will display the maximum disk storage capacity. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 49: Network Configuration

     Alternate DNS server  DHCP  Procedure Step 1 Choose Device Configuration > Local Network. The Local Network page is displayed, as shown in Figure 6-1. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 50 DHCP IP IP address that the DHCP server assigned to the device. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 51 The message "Set network parameters success, Please login system again" is displayed. Use the new IP address to log in to the web management system. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 52: Configuring Device Ports

    Port used for audio and video transfer and [Setting method] signaling interaction. Enter a value manually. [Default value] 30001 HTTP Port Port used in web access. [Setting method] Enter a value manually. [Default value] Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 53: Setting Platform Parameters

    Figure 6-3 Protocol Info page Table 6-3 Protocol-related parameters Parameter Description Protocol Name Type of the access protocol. Protocol Version Version number of the access protocol. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 54: Setting Security Authentication

    NOTE The default user name is admin, and the default password is HuaWei123. Step 2 Click OK. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 55: Setting Protocol Parameters

    Choose Protocol > CMS Register Info. The CMS Register Info page shown in Figure 6-5 is displayed. Table 6-5 describes the parameters on the CMS Register Info page. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 56 Enter a value manually. Port server Device Register Unique device identifier Enter a value manually. used by the platform. NOTE Set this parameter based on the platform requirements. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 57: Viewing The Adsl Network Parameters

    If the device uses PPPoE to connect to the Internet, the current IP address is displayed in IP Address.  If the device connects to the Internet in other modes, the currently IP address is not displayed in IP Address. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 58: Setting Pppoe Parameters

    PPPoE user name provided by the [Setting method] network carrier. Enter a value manually. Password Password provided by the network [Setting method] carrier. Enter a value manually. Step 4 Click OK. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 59: Setting Ddns Parameters

    Step 3 Set the parameters according to Table 6-7. Table 6-7 DDNS parameters Parameter Description Setting Enable DDNS Indicates whether to enable the DDNS [Setting method] service. Select the check box. [Default value] Deselected Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 60 If the message "DDNS Parameter Updated" is displayed, click OK. The system automatically saves the settings.  If other information is displayed, set the parameters correctly. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 61: Alarm Configuration

    Step 1 Choose Alarm Configuration > Alarm I/O. The Alarm I/O page is displayed, as shown in Figure 7-1. Figure 7-1 Alarm I/O page Step 2 Set the parameters according to Table 7-1. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 62 If the pulse mode is used, the alarm frequency  of the external alarm device can be configured. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 63: Setting I/O Alarm Linkage Parameters

    On the I/O Alarm Linkage page, you can perform the following operations:  Enable the I/O alarm function.  Configure the I/O alarm schedule.  Configure the alarm output channel. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 64 The Schedule Time Setting page control is displayed, as shown in Figure 7-3. Figure 7-3 Schedule Time Setting page control Configure time segments as required. Click OK. The system automatically saves the settings. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 65: Setting Motion Detection Alarm Linkage Parameters

    Step 1 Choose Alarm Configuration > Motion Alarm. The Motion Alarm page is displayed, as shown in Figure 7-4. Table 7-2 describes the motion detection alarm parameters. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 66 Preset from the Type drop-down Select a value from the drop- list box, you can select a preset position down list box. named preset1 from this drop-down list box. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 67 Setting areas within frames as detection areas Click Motion Area. The Motion Area Setting page is displayed, as shown in Figure 7-5. Figure 7-5 Motion Area Setting page Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 68: Processing Alarms

    Step 1 Choose Alarm Configuration > Alarm Setting. The Alarm Setting page is displayed, as shown in Figure 7-6. Figure 7-6 Alarm Setting page Step 2 Set Motion Detection Alarm Latch as required. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 69: Configuring The Alarm Center

    If the message "Invalid alarm center IP" is displayed, enter the correct IP address.  If the message "Invalid alarm center port, Please input an integer between 1 and 65534" is displayed, set the parameters correctly. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 70: Setting Smtp Parameters

    The SMTP page is displayed, as shown in Figure 7-8. Figure 7-8 SMTP page Step 2 Set the parameters according to Table 7-3. Parameters marked with are mandatory. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 71 Select a value from the drop-down list encryption modes supported box. by the SMTP server. [Default value] No Encrypted Step 3 Click OK. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 72 If the message "SMTP Service Parameter Updated" is displayed, click OK. The system automatically saves the settings.  If other information is displayed, set the parameters correctly. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 73: External Device Configuration

    PTZ Protocol, PTZ Address, Baud Rate, and Data Bits. Procedure Step 1 Choose External Device > PTZ. The PTZ page is displayed, as shown in Figure 8-1. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 74 Stop Bits The value must match the setting used by the external PTZ keyboard. Parity Verification The value must match the setting used by the external PTZ keyboard. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 75: Setting External Ptz Keyboard Parameters

    PTZ keyboard cannot be used. Procedure Step 1 Choose External Device > PTZ Keyboard. The PTZ Keyboard page is displayed, as shown in Figure 8-2. Figure 8-2 PTZ Keyboard page Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 76 Verification external PTZ keyboard. Step 3 Click OK. The message "Setting PTZ keyboard Updated" is displayed. Step 4 Click OK. The system automatically saves the settings. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 77: Daily Maintenance

    Network Time Protocol (NTP) server Procedure Step 1 Choose Device Configuration > Date&Time. The Date&Time page is displayed, as shown in Figure 9-1. Table 9-1 describes the parameters. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 78 Since March 27, 2011, Russia has started to use permanent DST. Device Time Device display time. [Setting method]  Synchronize the time from the PC.  Enter a value manually. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 79 Enter the IP address or domain name of the NTP server and the port number. Step 6 Click OK. The message "Parameter Updated" is displayed. Step 7 Click OK. The system automatically saves the settings. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 80: Querying Device Logs

    Step 3 Click Query. The operation logs related to the specified user are displayed. Step 4 Download the operation logs. Set the start time, end time and the log type. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 81: Querying Alarm Logs

    The Alarm Log page is displayed, as shown in Figure 9-3. Figure 9-3 Alarm Log page Step 2 Set the query start time and end time. Click the Begin Time and End Time text boxes respectively. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 82: Configuring User Permissions

    Only the users with the Privilege Manage permission can access the Group and User pages. Procedure Step 1 Choose Privilege Manager > Group. The Group page is displayed, as shown in Figure 9-4. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 83 The group is modified successfully. Step 4 Delete a group. Select the group from the Group drop-down list box. Click Delete, then the group is deleted successfully. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 84: Configuring A User

    A password cannot be the same as the user  name or the reverse of the user name. Delete Button for deleting a user. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 85: Upgrading Devices

    The only open interface provided the device is the SSH interface for logging in to the device during the system upgrade and maintenance. To upgrade the device, you must use a Huawei- provided upgrade tool to connect to the device. If you use other tools, the device may be damaged.

  • Page 86: Resetting The System Service Password

    Step 4 Confirm the password. Step 5 Click OK. The message "System Service Parameter Updated" is displayed. Step 6 Click OK. The system automatically saves the settings. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 87: Restarting A Device

    The device parameters are set incorrectly, and the device cannot work properly.  A user needs to reset device parameters.  All parameters must be restored to the factory settings. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 88: Collecting Logs

    The logs include overview information, key parameters, operation logs, alarm logs, upgrade logs, and debugging logs. For details about how to analyze the logs, see the Log Reference. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 89 Click Collect Log. The log link and the message "Please download log by ‘save as’ in the right key" are displayed. Right-click the link and save the logs. ----End Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 90: Troubleshooting

    Change the protocol, baud rate, and camera cannot be rate, or address is address in the web management system to controlled. incorrect. those used by the PTZ or PTZ camera. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 91  Verify that the network cable is properly connected. The upgrade package Obtain the correct upgrade package and is incorrect. upgrade the IP camera again. Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 92: Technical Specifications

    11 Technical Specifications Technical Specifications This document applies to IPC5802-Z20, IPC2802-Z18, and IPC1801-Z36. These models have the same appearance and structure and different sensors. Table 11-1 lists the technical specifications for specific sensors. For details about other technical specifications, see the product documentation.
  • Page 93 Hypertext Transfer Protocol Secure International Standard Organized Internet Protocol Identity Internet Protocol Camera Image Signal Process MJPEG Motion Joint Photographic Experts Group Media Access Control Network Time Protocol Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 94 National Television Standards Committee On Screen Display Power over Ethernet PPPoE Point-to-Point Protocol over Ethernet Pan Tilt Zoom Service Control Center SMTP Simple Mail Transfer Protocol Variable bit rate Issue 12 (2014-06-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

Ipc5802-z20Ipc2802-z18

Table of Contents