IPC1801-Z36&2802-Z18&5802-Z20
User Guide
8.1 Setting External PTZ Parameters
This function is available only to a camera connected to an external PTZ. The PTZ address
must be set to the address of the external PTZ; otherwise, the external PTZ cannot be used.
Description
When the IP camera connects to an external PTZ, you can set external PTZ parameters, such
as PTZ Protocol, PTZ Address, Baud Rate, and Data Bits.
Procedure
Step 1 Choose External Device > PTZ.
The PTZ page is displayed, as shown in Figure 8-1.
Issue 12 (2014-06-12)
8
External Device Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 External Device Configuration
63