York SOLUTION XTI Series Installation And Assembly Manual page 3

FORM 102.20-N1
ISSUE DATE: 7/06/2016
In complying with Johnson Controls' policy for con-
tinuous product improvement, the information con-
tained in this document is subject to change without
notice. Johnson Controls makes no commitment to
update or provide current information automatically
to the manual or product owner. Updated manuals, if
applicable, can be obtained by contacting the nearest
Johnson Controls Service office or accessing the John-
son Controls QuickLIT website at
johnsoncontrols.com.
It is the responsibility of rigging, installation, and op-
erating/service personnel to verify the applicability of
these documents to the equipment. If there is any ques-
York Air Handling Units Operation and Maintenance
Steps to Protect New Equipment Warranty
Air Handling Units Start-up Checklist
Long-Term Storage Requirement - Field Preparation - Air Handling Units
Long-Term Storage Periodic Checklist and Logs - Air Handling Units
Limited Warranty
Electric Motor Warranty
Air Cooled Condensing Unit DX Coil Split System Applications and Piping Guidelines
Air Modulator Service & Warranty Procedure
JOHNSON CONTROLS
CHANGEABILITY OF THIS DOCUMENT
http://cgproducts.
ASSOCIATED LITERATURE
MANUAL DESCRIPTION
tion regarding the applicability of these documents,
rigging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the unit.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
FORM NUMBER
102.20-OM1
102.20-CL1
100.00-CL1
50.05-NM3
50.20-CL3
50.05-NM2
50.05-NM2.2
50.40-ES3
SI0262
3