Troubleshooting In Diagnostic Mode - Lytx SF Series Installation Instructions Manual

3. Once the device has fully restarted, it will enter
Diagnostic Mode. To start, all LED status lights will turn
red.
Note: The device may be rebooted a maximum of 7 times in a 24-hour period.

Troubleshooting in Diagnostic Mode

Diagnostic Mode reveals issues with the device. Each of the LED status lights provides the
status of a different component of the device as shown below.
Please note:
All LED status lights will turn red to start. Each LED will turn green when/if the corres-
l
ponding feature is confirmed as working properly.
In Diagnostic Mode, the LED status lights will not turn any colors other than green or
l
red. (Except for LED 2, which may also turn yellow.)
The device will stay in Diagnostic Mode for 4 minutes. Pay attention to the LED status
l
lights during this time.
©2019 Lytx, Inc. - Confidential & Proprietary.
Color
●
Green OK
●
Red Error - requires
troubleshooting
(For LED 2 only) Error - requires
●
Yellow troubleshooting
Status
Page 47 of 51
(North America Edition)