Table of Contents
Advertisement
Maintenance & Troubleshooting
THE DEVICE SHOULD BE INSTALLED AND MAINTAINED BY QUALIFIED TECHNICIANS. Only a
properly qualified technician should install and maintain the SF-Series device. Any electrical
work should be performed only by an ASE (minimum T6 & L2), MECP or equivalent certified
technician with an expertise in installing and troubleshooting advanced vehicle onboard
components including multiplexed circuits. Lytx, Inc. disclaims all responsibility for any
damages arising from improper installation and maintenance of the SF-Series device.
Maintenance
After installation has been completed, Lytx recommends inspection and maintenance be
performed every time normal preventative maintenance is performed on the vehicle and
anytime the Lytx Vehicle Event Recorder or its wiring and electrical connections are moved,
re-installed or otherwise altered from their initial installation.
Take these steps:
1. Visually inspect all electrical cables for pinches, fraying or wear. Electrical cables that
are pinched or frayed may be found on vehicles where the electrical connection was
incorrectly installed. Further, cables and wires may become worn or exposed over time
due to contact with sharp edges or objects and when impacted by other electronic
work, mechanical work, or installations. If any actual or potential cable/wire damage is
detected, necessary repairs should be performed, potentially including re-installation
of the Lytx device.
2. Visually inspect all electrical connections to ensure they are fully secured. Electrical
connections may not be fully secured if the connection was incorrectly installed. They
may also be loosened when impacted by other electrical work, mechanical work, or
installations.
3. Visually inspect all wire and wire terminations to ensure they are proper and undam-
aged. Ensure that all wiring is undamaged and that all wire terminations are in
conformance with the suggestions set forth in
tions" starting on
Troubleshooting Installation Issues
If you're having difficulty troubleshooting or problems persist after taking the recommended
steps, please contact the Lytx Technical Support Center at 925.732.4246 or email
support@lytx.com.
©2019 Lytx, Inc. - Confidential & Proprietary.
page 23.
"Wiring and Wire Termination Sugges-
Page 42 of 51
(North America Edition)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
