Removing And Installing Cover - Volkswagen Touareg 2003 Workshop Manual

Automatic gearbox 09d
Hide thumbs Also See for Touareg 2003:
Table of Contents

Advertisement

– Bring entire surface of cuff -arrow- in contact with mounting
bracket.
– Install selector mechanism
2.6

Removing and installing cover

2.6.1
Removing
– Remove selector lever handle
– Procedure for disconnecting the battery must strictly be fol‐
lowed.
– With ignition switched off, disconnect battery ⇒ Electrical sys‐
tem; Rep. gr. 27 ; Disconnecting and connecting battery .
– Remove cover for centre console ⇒ General body repairs,
interior; Rep. gr. 68 ; Compartments, covers and trims; Re‐
moving and installing centre console .
– Pull off connector -1-.
– Carefully pull catches -2- on left and right off frame.
2.6.2
Installing
Install in reverse order of removal. During this step, observe the
following:
– Install cover for centre console ⇒ General body repairs, inte‐
rior; Rep. gr. 68 ; Compartments, covers and trims; Removing
and installing centre console .
– Connect battery ⇒ Electrical system; Rep. gr. 27 ; Battery;
Disconnecting and connecting battery .
– Install selector lever handle
Automatic gearbox 09D Volkswagen R GmbH - Edition 06.2010
⇒ page 30
.
⇒ page 17
.
⇒ page 17
.
Touareg 2003 ➤
2. Repairing selector mechanism
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents