Volkswagen Touareg 2003 Workshop Manual page 69

– Place multifunction switch -F125- on selector shaft.
– Tighten securing bolts -arrows B- for multifunction switch -
F125- by hand.
– Set setting gauge -T10173- on selector shaft.
– Disconnect selector lever cable.
– Turn multifunction switch -A- far enough that lug of connector
-arrow 1-engages in groove of setting gauge -T10173- .
Automatic gearbox 09D Volkswagen R GmbH - Edition 06.2010
4. Removing, installing and adjusting multifunction switch F125
Touareg 2003 ➤
65