Table of Contents
Advertisement
Rollomaximum XL
Replacing the roller in the front centre section
Lifting gear with a minimum lifting capacity of 1000 kg must be available.
Replacing the front centre roller
1. The machine is extended in-
to the working position and
lowered via the wheel frame
(A) until the axle (B) just
touches the ground.
2. Loosen and remove bolts
(C)
3. Then raise the machine on
the wheel frame (A) again.
4. The axle with cross-kill rings
are no free and can be
moved for repair with the
lifting gear.
5. Reverse procedure for as-
sembly
Do not activate hydraulics if persons are within machine extension radius.
A
B
A
C
A
Page 37
Advertisement
Table of Contents
