Description Of The Machine; Construction - DAL-BO Rollomaximum XL Manual

Construction

The Rollomaximum XL is a robust, multifunctional agricultural implement with the fol-
lowing features:
 The machine consists of 5 different working implements. At the front there is a
parallel-mounted hydraulically adjustable crackerboard, followed by a Ø53/Ø48
cm cross-kill roller. This in turn is followed by a harrow with four rows of hydrau-
lically adjustable tines. The maximum harrow depth is adjusted mechanically by a
"hydro-clip" on the hydraulic lift, but the entire harrow section is hydraulically
raised off the ground, for example when turning at headlands. The surface is lev-
elled again by a spring-mounted mechanically adjustable levelling board. Finally
the ground is compacted with a row of Ø50/Ø45 cm cross-kill rings.
 The side sections are fitted with a hydraulic weight transfer system, which is de-
signed to transfer some of the weight from the machine centre section to the side
wings, in order to ensure uniform tilling of the ground across the full width of the
machine.
 For optimum protection of the machine's core components, all assemblies are
mounted on spring mechanisms.
Rollomaximum XL is designed to receive the following optional extras:
 The machine can be optionally fitted with track looseners for tractor rear wheel
widths of up to 4.5 metres. In addition, the cross-kill rings can be replaced with a
Ø50 cm front roller cage and a Ø45 cm back roller cage.
Rollomaximum XL

Description of the machine

Page 11