Table of Contents
Advertisement
Do not use the rear levelling board as a dozer blade. This will cause un-
necessarily loading of the machine and lead to a poor surface finish.
Adjusting the rear cross-kill board
The rear cross-kill roller (A) is adjusted ex works via the row of holes (B) so
that the frame (C) is level, when the machine is in the working position on a
level surface.
Good maintenance ensures long machine service life and optimum use.
Grease nipples are provided where wear is heaviest.
Retighten all screw connections after the first working day. Check all split
pins and pins to avoid mechanical failure. Check hydraulic system for leaks.
Lubrication
Rollomaximum XL
sure optimum work-
ing across the whole
working width.
If the underlying soil
is very loose, it may
be necessary to adjust
the compaction
mounting via the
holes (B) so that the
frame (C) is levelled.
Maintenance
A
Horizontal
A
B
B
C
Page 23
Advertisement
Table of Contents
