UniCarriers FG20 Series Operation & Maintenance Manual page 37

Use caution not to fall down from the
truck when working on the truck
Do not climb on the truck frame to inspect or service
the truck. If you must climb up on the truck, wear a
hard hat and use caution not to fall. When making
checks or servicing in an elevated location, use an
appropriate step stool or work platform and wear a
hard hat, a safety belt and safety rope.
Do not use the mast as a ladder:
• When carrying out checks or adjustment, do not
use the connecting member or load backrest as
a ladder. The mast might move unexpectedly,
pinching or cutting your hands or feet.
Do not use the mast as a ladder. You might
•
fall down from the mast, leading to a serious
accident.
INSPECTION AND SERVICE
Engine-powered trucks
Use due caution when working on rotating parts,
not to get your body or fingers entangled in them.
Before checking a rotating part, make sure the
engine is shut down. Do not bring something near
rotating parts.
Engine-powered trucks
Immediately after the engine is shut down, the
engine oil is hot and in high pressure. Do not try to
drain oil or replace the filter.
Hot engine oil might spout out to cause burns.
1-32
Shut down the engine before working on
rotating parts
Make sure the engine is cool enough
before servicing it