UniCarriers FG20 Series Operation & Maintenance Manual page 100

V2403
8 FAN BELT
CAUTION
Make sure the engine is shut down before
checking the fan belt for tension.
Check the belt tension (deflection) by pressing the
middle part on each span (areas indicated by arrows).
Check also for cracks or damage of the belt. If defective,
adjust or replace it with a new one.
Engine model
12 – 14 mm
K21
(0.5 – 0.6 in.)
10 – 15 mm
C240
(0.4 – 0.6 in.)
7 – 9 mm
V2403
(0.3 – 0.4 in.)
PREOPERATIONAL CHECKS
Belt deflection
When a pressure of 98 N
(10 kgf) (22 lbs) is applied.
K21
GENERATOR
PULLEY
4-9
DIPSTICK
High Level
Low Level
Push
CRANK PULLEY