Traveling - UniCarriers FG20 Series Operation & Maintenance Manual

Do not operate the lift truck until
preoperational checks are finished
If any defect is found during checking, report it to
the supervisor and have it repaired.
Do not operate the truck until the malfunction or
damage is properly repaired.
Mount properly
Never mount or dismount a moving truck. When
getting on and off the truck, make sure the truck is
at a complete stop and use the recommended hand
holds and steps with at least three points of support
(for example, put your left foot on a step, and hold
a hand hold with your left hand and the backrest
of the seat with your right hand). Keep the steps,
hand holds and the seat always clean. Repair if
damaged.
When starting the engine
Engine-powered trucks
When starting the engine, make sure to:
1) Apply the parking brake securely.
2) Place the direction shift lever and speed range
shift lever into neutral.
3) Adjust the steering column angle and driver's
seat position before starting the engine.
Do not try to adjust them during operation;
otherwise a serious accident might occur.
After adjustment, make sure they are securely
locked.
4) Seat yourself in the operator's seat and fasten
the seat belt.
5) Press the clutch pedal (trucks with clutch) or
brake pedal (trucks with torque converter).
6) Make sure there is no one under or around the
truck, and start the engine.

TRAVELING

Caution to be taken when starting the
electric truck
Electric trucks
Before trying to start the truck (before turning the
key switch to ON), follow the procedure given
below:
1) Apply the parking brake.
2) Place the direction shift lever in neutral.
3) Adjust the steering wheel and operator's seat
before turning the key switch ON. Do not try
to adjust them during operation; otherwise a
serious accident might occur.
After adjustment, make sure they are securely
locked.
4) Seat yourself in the operator's seat and fasten
the seat belt.
5) Press the brake pedal.
6) Make sure there is no one under or around the
truck, and turn the key switch to ON.
Do not move controls unless properly
seated
Do not operate the controls (levers and pedals)
unless you are properly seated.
1-18